Gummi-Kraftstoff- und Ölschläuche

6 Produkte

Alle löschen
  • Rubber Ultraflex Fuel Filler Neck Hose Rubber Hoses Hoses UK

    Gummi-Ultraflex-Kraftstoff-Einfüllstutzenschlauch

    E5/E10-kompatibel Flexibel Gewickeltes Finish

    Ab £7.03
    Ab £7.03
  • Rubber Marine Fuel & Oil Hose Rubber Hoses Hoses UK

    Rubber Marine Fuel & Oil Hose

    ISO7480 Standard A1 Spec Fuel & Oil Safe

    Ab £3.22
    Ab £3.22
  • Rubber Multi Purpose Fuel & Oil Hose Hoses UK 5mm 1 Metre

    Rubber Multi Purpose Fuel & Oil Hose

    E5/E10 Anti-Static Extreme Flexiblity

    Ab £2.54
    Ab £2.54
  • Rubber Cotton Braided Fuel Hose Rubber Hoses Hoses UK 3mm 1 Metre

    Rubber Cotton Braided Fuel Hose

    Braided Polyester Smaller Diameters E5/E10

    Ab £2.06
    Ab £2.06
  • Rubber Unreinforced Fuel & Oil Hose Rubber Hoses Hoses UK 3mm 1 Metre

    Rubber Unreinforced Fuel & Oil Hose

    Smooth Extruded Flexible 70 Shore A hardness
    Ab £1.30
    Ab £1.30
  • Rubber Steel Braided Fuel Hose Hoses UK 10mm 1 Metre

    Rubber Steel Braided Fuel Hose

    304 Steel Braid AN Type E5/E10 Compatible

    Ab £5.66
    Ab £5.66

Gummi-Kraftstoff- und Ölschläuche

Kraftstoff- und Öl-Förderschläuche aus Gummi sind flexible Schläuche, die zum Transport von Erdölprodukten von einem Ort zum anderen verwendet werden. Diese Schläuche werden häufig im Automobil- und Industriesektor zum Transport von Dieselkraftstoff, Öl und anderen Produkten auf Erdölbasis verwendet.

Gummi-Förderschläuche für Kraftstoff und Öl bestehen normalerweise aus einer Kombination aus Natur- und Synthesekautschuk und sind mit Gewebe- oder Stahldrahtschichten verstärkt. Das für diese Schläuche verwendete Gummimaterial wird aufgrund seiner Haltbarkeit, Hitze- und Chemikalienbeständigkeit sowie seiner Fähigkeit, hohen Drücken standzuhalten, ausgewählt.

Der Innendurchmesser von Gummischläuchen für Dieselkraftstoff und Öl kann variieren, liegt aber normalerweise im Bereich von 5–25 mm. Die Schlauchlänge ist ebenfalls variabel und kann je nach Anwendungsbedarf zugeschnitten werden.

Which fuel hose do I actually need?
It depends on the job. For a general fuel or oil line, the Multi-Purpose Fuel & Oil hose covers 5mm to 25mm and is anti-static and very flexible. For small-bore carburettor and injector return lines, the Cotton Braided hose runs 3mm to 12mm. For a fuel filler neck, use the Ultraflex filler hose in 38mm, 51mm or 57mm. For a boat, you need the ISO 7840 marine hose. For high-pressure or exposed engine bay runs, the stainless overbraid hose. Tell us the application and we will confirm.

Are your fuel hoses compatible with E5 and E10 petrol?
Yes - the nitrile-based hoses in this range are formulated for modern ethanol-blended fuels as well as diesel and oils. This matters more than people expect: ethanol attacks unsuitable rubber from the inside, so an old fuel line can look perfectly sound externally while it is breaking down internally and shedding debris into the fuel system.

What does anti-static mean and when do I need it?
Fuel flowing through a hose generates static electricity. An anti-static hose has a conductive path that allows that charge to dissipate rather than build up and discharge as a spark. It matters most on higher-flow transfer applications and anywhere fuel is being decanted or pumped in quantity. Our Multi-Purpose Fuel & Oil hose is anti-static for exactly this reason.

What is a filler neck hose and why is it different?
The filler neck is the large-bore hose between the filler cap and the tank. It is a much larger diameter than a fuel line - ours are 38mm, 51mm and 57mm - and it has a steel wire helix in the wall so it will not collapse or kink as it curves round the bodywork. Our Ultraflex filler hose uses an NBR inner tube with a chloroprene outer for fuel resistance and weathering.

Can I use unreinforced fuel hose on a pressurised system?
No. The unreinforced hose is a smooth extruded nitrile tube with no braid, intended for low-pressure gravity feeds, breathers and transfer work in 3mm to 10mm bores. Anything on a pressurised injection system needs a reinforced hose - use the braided, multi-purpose or stainless overbraid options. If you are unsure whether your line is pressurised, assume it is and use reinforced.

What standards are these hoses made to?
Most are SAE J30 R6, which is the standard automotive fuel and oil hose specification. The marine hose is ISO 7840 A1, the fire-tested grade required on boats. The cotton braided hose is DIN 73379 Type B, and the unreinforced hose is BS EN ISO 11424:2007. Buying to a recognised standard is worth doing with fuel hose - it is not the place to economise.

  • Questions about Gummi-Kraftstoff- und Ölschläuche?

    Ask our team

  • Need something bespoke?

    View our custom hose guide.

Other Collections