Schlauch- und Leitungsverbinder

10 Produkte

Alle löschen
  • Aluminium Beaded Hose Joiner Metal Tubes Auto Silicone Hoses

    Aluminium Beaded Hose Joiner

    Beaded Ends 1.6mm Wall T6063 Aluminium
    Ab £6.38
    Ab £6.38
  • Aluminium Tube Off Cut Mixed Box Metal Tubes Auto Silicone Hoses
    Bis zu £3.50 Rabatt

    Aluminiumrohrreste, gemischte Box

    Poliertes Finish Gemischte Längen 1,6 Wandstärken
    £13.99
    £13.99 £17.49
  • Plastic Hose Inline Barbed 45 Degree Elbow Plastic Joiner Auto Silicone Hoses 8mm Black

    Kunststoffschlauch Inline mit Widerhaken, 45-Grad-Winkelstück

    3D Printed ABS Plastic Thick Walled
    Ab £4.11
    Ab £4.11
  • Aluminium Hose Connector Metal Tubes Auto Silicone Hoses

    Aluminium Hose Connector

    Unbeaded Ends 1.6mm Wall T6063 Aluminium
    Ab £3.98
    Ab £3.98

  • Plastic Straight Reducing Joiner

    3D Printed ABS Plastic Thick Walled
    Ab £4.11
    Ab £4.11
  • Reducing Male Connector for PU Polyurethane Ducting Plastic Joiner Auto Silicone Hoses 65mm > 50mm Black

    Reduzierstecker männlich für PU-Polyurethan-Rohre

    3D Printed ABS Plastic Thick Walled
    Ab £7.50
    Ab £7.50

  • Plastic 90 Degree Joiner

    3D Printed ABS Plastic Thick Walled
    Ab £1.40
    Ab £1.40
  • Plastic Straight Joiner Plastic Joiner Silicone Hose UK

    Plastic Straight Joiner

    3D Printed ABS Plastic Thick Walled
    Ab £4.11
    Ab £4.11
  • Male Connector / Coupler for PU Polyurethane Ducting Plastic Joiner Auto Silicone Hoses 50mm Black

    Stecker/Kupplung für PU-Polyurethan-Rohre

    3D Printed ABS Plastic Thick Walled
    Ab £6.95
    Ab £6.95
  • Corrugated Pond Hose Plastic Joiner Plastic Joiner Auto Silicone Hoses

    Gewellter Teichschlauch-Kunststoffverbinder

    3D Printed ABS Plastic Thick Walled
    Ab £3.95
    Ab £3.95

Schlauch- und Leitungsverbinder

Schlauch- und Kanalverbinder sind für die nahtlose Integration mit dem Premiumsortiment an Schläuchen und Kanallösungen von Silicone Hose UK konzipiert. Diese Kollektion umfasst Hochleistungsverbinder aus langlebigem Aluminium und leichtem Kunststoff, die für eine Vielzahl anspruchsvoller Anwendungen geeignet sind.

Die Aluminiumverbinder bieten außergewöhnliche Festigkeit und Korrosionsbeständigkeit und sind daher ideal für Umgebungen mit hohem Druck und hohen Temperaturen. Unsere Kunststoffverbinder sind flexibel und kosteneffizient und bieten eine zuverlässige Lösung für weniger extreme Bedingungen, ohne Kompromisse bei Qualität oder Haltbarkeit einzugehen.

Egal, ob Sie an Kraftstoffleitungen, Kühlsystemen oder Auspuffverbindungen arbeiten, unsere Verbindungsstücke sorgen für einen präzisen, sicheren Sitz und zuverlässige Leistung. Entdecken Sie diese Kollektion, um den perfekten Anschluss für Ihre Anforderungen zu finden, der denselben strengen Standards entspricht wie unsere Silikonschläuche.

What joiners do you stock?
Aluminium beaded and unbeaded straight joiners and an off-cut tube box; plastic barbed straight, reducing and 45 and 90 degree joiners; a corrugated pond hose joiner; and male and reducing connectors for polyurethane ducting in 50mm to 200mm outside diameter.

How do I choose between metal and plastic?
Metal for anything pressurised, hot, or in an engine bay - it holds the bore round and takes the clamping load. Plastic for low-pressure water, ducting and pond work where cost matters and there is no heat. Plastic will not corrode, which is an advantage outdoors, but it has neither the temperature range nor the strength.

How do I size a joiner?
Metal joiners are ordered by outside diameter, matched to the internal diameter of the hose sliding over them. Plastic barbed joiners are the same principle - match the barb OD to the hose bore. It should be a firm push fit; warming the hose end in hot water helps on larger sizes.

Do I need a clip on a barbed joiner?
On anything pressurised, or anything that matters if it comes off, yes. The barb resists pull-off but does not seal on its own once the hose relaxes with age and temperature. A stainless clip is cheap insurance - especially on a pond or ducting connection where a failure makes a mess.

What is the pond hose joiner for?
Joining corrugated pond hose, which a smooth barb grips poorly because of the corrugations. It is shaped to engage the corrugated profile properly. Use a stainless clip each side - a pond hose that works loose can empty a pond, which costs far more than the fitting.

How do I join two different sizes?
Use a reducing joiner rather than stretching one hose over an oversized barb, which gives an uneven seal and a joint that creeps. We do plastic straight reducing joiners, plastic 45 and 90 degree reducing joiners, and reducing PU ducting connectors covering 20 size pairings from 65mm to 50mm up to 200mm to 150mm.

  • Questions about Schlauch- und Leitungsverbinder?

    Ask our team

  • Need something bespoke?

    View our custom hose guide.

Other Collections