Silikonschläuche

62 Produkte


Silikonschläuche

Unsere vielseitigen und langlebigen Silikonschläuche sind so konzipiert, dass sie Ihre Flüssigkeitstransfersysteme auf ein unübertroffenes Niveau an Effizienz und Leistung heben. Diese mit Präzision und Innovation gefertigten Schläuche eignen sich hervorragend für eine Vielzahl von Anwendungen, von der Automobil- und Industriebranche bis hin zum Haushalt und darüber hinaus.


Diese Schläuche bestehen aus einer nahtlosen Mischung aus hochwertigem Silikonkautschuk und garantieren außergewöhnliche Flexibilität, Belastbarkeit und Temperaturbeständigkeit. Egal, ob Sie Kühlmittel, Luft, Öl oder andere Flüssigkeiten handhaben, diese Schläuche behalten auch unter extremen Bedingungen ihre Integrität, gewährleisten einen reibungslosen Durchfluss und verhindern Leckagen.


Wir haben für Sie das Passende in einer Reihe von Innendurchmessern von 6,5 mm bis 152 mm. Diese sind auch in bis zu 3 leuchtenden Farben erhältlich: Schwarz, Blau und Rot. Von Standard-Schläuchen bis hin zu komplexen Biegungen und Formen finden Sie die perfekte Lösung für Ihr Systemlayout. Die leuchtenden Farboptionen sorgen nicht nur für eine moderne Ästhetik, sondern zeigen auch, wie sehr wir uns der Gewährleistung der Produktqualität widmen.


Unsere Silikonschläuche vereinen Spitzentechnologie mit strengen Tests und bieten unübertroffene Zuverlässigkeit und Langlebigkeit. Sie sind rissbeständig, UV-beständig und ozonbeständig, behalten ihre Leistung über lange Zeit bei und reduzieren so Wartungskosten und Systemausfallzeiten.

What silicone hose do I need for my job?

For a straight run, 1 metre straight hose or continuous coil. For a corner, a moulded elbow in 45, 90, 135 or 180 degrees. To join two stubs, a coupling hose. To change diameter, a straight reducer or a reducing elbow. Where vibration or misalignment is involved, a hump connector. For vacuum or tight bends, the wire reinforced SuperFlex. Tell us the application if you are unsure.

What is the difference between standard and Fuel & Oil silicone?

Standard silicone is built to SAE J20 R3 and is excellent with coolant, water and air - but it swells and breaks down in contact with petrol, diesel or oil. Fuel & Oil silicone has a fluorosilicone inner liner built to SAE J30 R6 and handles hydrocarbons including E5 and E10 pump fuel. If fuel or oil touches the inside of the hose, you need the Fuel & Oil version.

What temperature and pressure will standard silicone take?

Continuous service from -50C to +250C, with working pressure from around 12.33 bar on the smallest bores down to about 2.8 bar on the largest, and burst pressures up to 37 bar. That is a very large margin over what a car cooling system asks - typically 1 to 1.5 bar and well under 120C - which is why silicone hose so comfortably outlasts the rubber it replaces.

Why choose silicone over rubber?

Silicone does not perish, harden or crack with age, heat cycling or ozone exposure, so it does not have the service life that rubber does. It handles far higher temperatures, stays flexible in the cold, and comes in colours. The trade-offs are cost and the fact that standard silicone is not fuel or oil compatible. For a hose in an awkward position, silicone is worth paying for once.

What sizes and colours do you stock?

Straight hose from 6mm to 152mm, elbows from 6mm to 102mm, couplers from 13mm to 152mm, reducers in 61 straight and 43 elbow size pairings. Standard silicone comes in blue, black and red; Fuel & Oil and wrapped hose are black only. If you are building a full system, order it all together so the colour matches across batches.

How many plies do I need?

Ply count is matched to bore and duty - our hose is 3 or 4 ply across most of the range, with 2 ply on the smaller heater hose sizes where flexibility matters more than pressure. You do not normally need to specify it: each product is built with the appropriate reinforcement for its size. If you have an unusual pressure requirement, tell us and we will confirm.